Today we spent most of the day putting on body filler in the low spots and sanding it off. Each time the low spots got smaller and smaller until there were no low spots. It is very time consuming, but worth it to get the panels straight.

Then a thin layer of Icing was put over all the body filler and slightly past the outer edges. Icing is like a runny layer of body filler. It is easy to sand and fills in small imperfections.

The next step is to sand down the Icing, fill any slight imperfections with more Icing, and then after sanding those, spray a coat of epoxy primer over the whole quarter panel.